Drive unit, roller conveyor

Type RDU 23

Underslung mounted drive unit designed for roller conveyor type RBA 23.
It is equipped with a tension roller for belt tensioning. RDU is mounted in
the lower hole sequence of the frame, in proximity to the loading point.
If this for any reason is not possible, RDU 23 can be installed in any position
along the hole sequence. The drive unit does not require any space outside
the width of the roller conveyor.

Capacity

This depends on whether the conveyor is used for accumulating or conveying.
For maximum load see table.

Product description
Foundation: Steel construction
Motor: Worm gear motor. Standard motor supplied with 2 m rubber cable
Voltage: 3x230/400 V, 50 Hz
Side guide: Zinc, plated steel Aluminium, naturally anodised
Surface finish: Zinc, plated steel Aluminium, naturally anodised
Product data
Speed Motor Power Max Load Max load accumulating
m/s kW kg kg
0.10 0.18 900 500
0.12 0.18 900 500
0.18 0.25 900 500
0.23 0.25 900 500
0.30 0.37 900 500
0.36 0.37 900 500
0.42 0.37 900 500
0.47 0.37 900 500
0.59 0.37 900 500
0.71 0.37 900 0.71
0.81 0.37 630 0.81
0.90 0.25 540 0.90
1.13 0.37 430 1.13
1.41 0.37 320 1.41
NW Nominal width 300, 400, 500, 600, 800 mm
LT/RT Set-up side Left / Right

Placement of drive unit

TL P L
<1800 60 133
<1800 100 173
<1680 140 213
<1800 180 253
<1920 60, 100, 140, 180 653